|
|
Post by anil1952 on Jun 17, 2009 6:53:38 GMT -5
I have a vertical cut section drawing (a single view) of a sliding gate steam regulator (throttle), for a 3-1/2" Jenny Lind 2-2-2 Tender Locomotive. However, the manual does not give any machining details. I am finding it very difficult to machine the part from the one single drawing that I have. Can anybody help me here? I wish I could I post a scanned image of the drawing that I have, but there seems to be no provision for this in this forum.
|
|
|
|
Post by pkastagehand on Jun 17, 2009 10:34:38 GMT -5
To post a photo you must have the photo on a site that is publicly accessible. Put the URL in your post where you want the photo to appear. In front of the URL put the HTML image tag which is: square bracket, the letters img, then square closing braket with no spaces ( like this: [ img ] but leave out spaces between everything) and the close image tag after the URL ( [ / img ] ).
I can't actually type it because then it would try to function.
Paul
|
|
|
|
Post by anil1952 on Jun 18, 2009 0:46:01 GMT -5
Can I post the image on Facebook?
|
|
|
|
Post by pkastagehand on Jun 22, 2009 10:33:16 GMT -5
Can I post the image on Facebook? I don't use facebook nor do I know how it works but if a photo can be publicly accessed then a link to it should work. Flickr is another one maybe and of course photobucket and those type places. Paul |
|
