Post by dampfauf on Aug 6, 2023 11:44:15 GMT -5
Hello.
I want to build a rail bender, i have plenty of used track material from LGB.
However, the smallest curve should not be less than R5 or 1800 therefore, all other curves should be bent accordingly.
Do not bend the single loose track, but bend both rails with the track bed in parallel in one operation.
Similar to Trainli or Massoth
I created the frame parts with a 3D printer, bought the bearings and screws and built the following ones.
It works, but still needs some updates (I'm working on that at the moment).
Does anyone have experience with other replicas and can recommend something.
Regards
Wolfgang
I want to build a rail bender, i have plenty of used track material from LGB.
However, the smallest curve should not be less than R5 or 1800 therefore, all other curves should be bent accordingly.
Do not bend the single loose track, but bend both rails with the track bed in parallel in one operation.
Similar to Trainli or Massoth
I created the frame parts with a 3D printer, bought the bearings and screws and built the following ones.
It works, but still needs some updates (I'm working on that at the moment).
Does anyone have experience with other replicas and can recommend something.
Regards
Wolfgang