|
Post by David T on Nov 7, 2003 11:16:19 GMT -5
I started the Heisler but then changed to Allen Models Mogul. I wanted to have a engine that would work to pull the puloc on our run days at PNLS. (pnls.org) Anyways, Mr Allen has drivers that finish to 6 3/8" for his Consolidated engine. They sell for $167.00 for eight. So four should be half of that. Part number is C0109. My eight inch driver castings were about 8 3/4" rough, should be enough on the smaller drivers to finish at 6 1/2" or a steel tire could be used
|
|