|
 Author | Topic: Sievert Cyclone Torch (Read 144 times) |
leeharrysouth
Fireman
member is offline
Joined: Sept 2009
Posts: 20
|  | Sievert Cyclone Torch
« Thread Started on Sept 22, 2009, 5:57am » | |
I have recently obtained Kozo Hiraoka's Penn. A-3 Swittcher (The first project for the beginner). I am Just that, a beginner. In this book Kozo recommends the Sievert Cyclone Torch for LP gas. I would like to get the kit with hose, regulator, torch and interchangable tips. The kit best for modeling purposes. Can any one tell me what kit to get and where to get it.
leeharrysouth
| |
|
daveb1
Engineer
member is offline
Joined: Sept 2008
Gender: Male 
Posts: 42
Location: Bow NH
| | Re: Sievert Cyclone Torch
« Reply #1 on Sept 22, 2009, 9:02am » | |
Hi Lee, I bought my torch set directly from Sievert. The following is what I ordered
3940-02 3900btu burner
2941-02 26000 btu burner
2943-02 88500btu burner
2488-47 universal handle
3062-93 regulator
3509-02 7" necktube
15121s 12' hose
So far I have used the small torch on the new shay frame and the medium torch on the wheels. They have worked out very well. The large torch is used for the boiler and I am not there yet. Sievert was very good to deal with and they shipped the same day I ordered. The selection of this equipment was recommeded by Ed Hume on a thread under the Kozo section of this site. You might want to look it up.
|
Dave Barker |
|
leeharrysouth
Fireman
member is offline
Joined: Sept 2009
Posts: 20
| | Re: Sievert Cyclone Torch
« Reply #2 on Sept 22, 2009, 10:12am » | |
Thanks Dave. Thats what I needed to know.
lee
| |
|
leeharrysouth
Fireman
member is offline
Joined: Sept 2009
Posts: 20
| | Re: Sievert Cyclone Torch
« Reply #3 on Sept 22, 2009, 10:41am » | |
Dave I could not find ED Hume's thread on this subject and the part # geven such as univeral handle 2488-47 were not listed under the sievert universal web page. May I ask who you acturally delt with. Maybe I can give them a call.
thanks
lee
| |
|
daveb1
Engineer
member is offline
Joined: Sept 2008
Gender: Male
Posts: 42
Location: Bow NH
| | Re: Sievert Cyclone Torch
« Reply #4 on Sept 22, 2009, 2:07pm » | |
Lee, the thread was started by Jeff02 on the kozo support group. Topic was "Sievert torches????"
If you go to the Sievert site you must check North America(upper rt hand corner). This gets you to NA which I guess has different part numbers than Sweden. Anyway if you don't have any luck the telephone no is 815-639-1319
|
Dave Barker |
|
leeharrysouth
Fireman
member is offline
Joined: Sept 2009
Posts: 20
| | Re: Sievert Cyclone Torch
« Reply #5 on Sept 27, 2009, 8:35am » | |
Thaks Dave. It looks like the best way to go is threw Sievert. I called a few of their dealers and for some reason they seemed to have trouble matching up part numbers and giving specific awnsers to questions. I emailed Sievert and they shot it right back to me with the help I needed. Seem like good people.
lee
| |
|
|
![[Search This Thread]](http://s4.images.proboards.com/search2.gif)
![[Send Topic To Friend]](http://s4.images.proboards.com/buttons/sendtopic.gif)
![[Print]](http://s4.images.proboards.com/buttons/print.gif)
Logged